Wasserschlauch
About points...
We associate a certain number of points with each exercise.
When you click an exercise into a collection, this number will be taken as points for the exercise, kind of "by default".
But once the exercise is on the collection, you can edit the number of points for the exercise in the collection independently, without any effect on "points by default" as represented by the number here.
That being said... How many "default points" should you associate with an exercise upon creation?
As with difficulty, there is no straight forward and generally accepted way.
But as a guideline, we tend to give as many points by default as there are mathematical steps to do in the exercise.
Again, very vague... But the number should kind of represent the "work" required.
When you click an exercise into a collection, this number will be taken as points for the exercise, kind of "by default".
But once the exercise is on the collection, you can edit the number of points for the exercise in the collection independently, without any effect on "points by default" as represented by the number here.
That being said... How many "default points" should you associate with an exercise upon creation?
As with difficulty, there is no straight forward and generally accepted way.
But as a guideline, we tend to give as many points by default as there are mathematical steps to do in the exercise.
Again, very vague... But the number should kind of represent the "work" required.
About difficulty...
We associate a certain difficulty with each exercise.
When you click an exercise into a collection, this number will be taken as difficulty for the exercise, kind of "by default".
But once the exercise is on the collection, you can edit its difficulty in the collection independently, without any effect on the "difficulty by default" here.
Why we use chess pieces? Well... we like chess, we like playing around with \(\LaTeX\)-fonts, we wanted symbols that need less space than six stars in a table-column... But in your layouts, you are of course free to indicate the difficulty of the exercise the way you want.
That being said... How "difficult" is an exercise? It depends on many factors, like what was being taught etc.
In physics exercises, we try to follow this pattern:
Level 1 - One formula (one you would find in a reference book) is enough to solve the exercise. Example exercise
Level 2 - Two formulas are needed, it's possible to compute an "in-between" solution, i.e. no algebraic equation needed. Example exercise
Level 3 - "Chain-computations" like on level 2, but 3+ calculations. Still, no equations, i.e. you are not forced to solve it in an algebraic manner. Example exercise
Level 4 - Exercise needs to be solved by algebraic equations, not possible to calculate numerical "in-between" results. Example exercise
Level 5 -
Level 6 -
When you click an exercise into a collection, this number will be taken as difficulty for the exercise, kind of "by default".
But once the exercise is on the collection, you can edit its difficulty in the collection independently, without any effect on the "difficulty by default" here.
Why we use chess pieces? Well... we like chess, we like playing around with \(\LaTeX\)-fonts, we wanted symbols that need less space than six stars in a table-column... But in your layouts, you are of course free to indicate the difficulty of the exercise the way you want.
That being said... How "difficult" is an exercise? It depends on many factors, like what was being taught etc.
In physics exercises, we try to follow this pattern:
Level 1 - One formula (one you would find in a reference book) is enough to solve the exercise. Example exercise
Level 2 - Two formulas are needed, it's possible to compute an "in-between" solution, i.e. no algebraic equation needed. Example exercise
Level 3 - "Chain-computations" like on level 2, but 3+ calculations. Still, no equations, i.e. you are not forced to solve it in an algebraic manner. Example exercise
Level 4 - Exercise needs to be solved by algebraic equations, not possible to calculate numerical "in-between" results. Example exercise
Level 5 -
Level 6 -
Question
Solution
Short
Video
\(\LaTeX\)
Need help? Yes, please!
The following quantities appear in the problem:
The following formulas must be used to solve the exercise:
No explanation / solution video to this exercise has yet been created.
Visit our YouTube-Channel to see solutions to other exercises.
Don't forget to subscribe to our channel, like the videos and leave comments!
Visit our YouTube-Channel to see solutions to other exercises.
Don't forget to subscribe to our channel, like the videos and leave comments!
Exercise:
Wasser kann aus einem Schlauch mit Düse mit bis zu austreten. In welcher Höhe trifft der Wasserstrahl eine m entfernte Wand wenn das Schlauche in m Höhe über dem Boden unter dem Elevationswinkel ang gegen sie gerichtet wird?
Solution:
Tun wir so als ob der Schlauch einzelne Wassertropfen verspritze und verfolgen wir einen davon. Als erstes berechnen wir die Zeit die der Tropfen braucht um die Wand zu erreichen: t fracs_xv_x fracs_xv cosalpha fracm cosang .s. Die Höhe des Wassertropfens gehorcht zu allen Zeiten der Gleichung h -fracgt^ +v_yt + h_. Damit können wir die Höhe des Wassertropfens nach pq.s und damit die Höhe an der Wand ausrechnen: h -frac .q .s^ + sinang .s + m .m.
Wasser kann aus einem Schlauch mit Düse mit bis zu austreten. In welcher Höhe trifft der Wasserstrahl eine m entfernte Wand wenn das Schlauche in m Höhe über dem Boden unter dem Elevationswinkel ang gegen sie gerichtet wird?
Solution:
Tun wir so als ob der Schlauch einzelne Wassertropfen verspritze und verfolgen wir einen davon. Als erstes berechnen wir die Zeit die der Tropfen braucht um die Wand zu erreichen: t fracs_xv_x fracs_xv cosalpha fracm cosang .s. Die Höhe des Wassertropfens gehorcht zu allen Zeiten der Gleichung h -fracgt^ +v_yt + h_. Damit können wir die Höhe des Wassertropfens nach pq.s und damit die Höhe an der Wand ausrechnen: h -frac .q .s^ + sinang .s + m .m.
Meta Information
Exercise:
Wasser kann aus einem Schlauch mit Düse mit bis zu austreten. In welcher Höhe trifft der Wasserstrahl eine m entfernte Wand wenn das Schlauche in m Höhe über dem Boden unter dem Elevationswinkel ang gegen sie gerichtet wird?
Solution:
Tun wir so als ob der Schlauch einzelne Wassertropfen verspritze und verfolgen wir einen davon. Als erstes berechnen wir die Zeit die der Tropfen braucht um die Wand zu erreichen: t fracs_xv_x fracs_xv cosalpha fracm cosang .s. Die Höhe des Wassertropfens gehorcht zu allen Zeiten der Gleichung h -fracgt^ +v_yt + h_. Damit können wir die Höhe des Wassertropfens nach pq.s und damit die Höhe an der Wand ausrechnen: h -frac .q .s^ + sinang .s + m .m.
Wasser kann aus einem Schlauch mit Düse mit bis zu austreten. In welcher Höhe trifft der Wasserstrahl eine m entfernte Wand wenn das Schlauche in m Höhe über dem Boden unter dem Elevationswinkel ang gegen sie gerichtet wird?
Solution:
Tun wir so als ob der Schlauch einzelne Wassertropfen verspritze und verfolgen wir einen davon. Als erstes berechnen wir die Zeit die der Tropfen braucht um die Wand zu erreichen: t fracs_xv_x fracs_xv cosalpha fracm cosang .s. Die Höhe des Wassertropfens gehorcht zu allen Zeiten der Gleichung h -fracgt^ +v_yt + h_. Damit können wir die Höhe des Wassertropfens nach pq.s und damit die Höhe an der Wand ausrechnen: h -frac .q .s^ + sinang .s + m .m.
Contained in these collections:
-
Schiefer Wurf [v0 sx sy alpha] by TeXercises